|
Model 型号 |
HAA1600HT |
|
Nominal Voltage 标称电压 |
1.2V |
|
Nominal Capacity 标称容量 |
1600mAh |
|
Typical Capacity 典型容量 |
1650mAh after standard charge and standard discharge 1650mAh标准充电和放电条件下 |
|
Minimum Capacity 最低容量 |
1600mAh after standard charge and standard discharge 1600mAh标准充电和放电条件下 |
|
Standard Charge 标准充电 |
0.1C for 16hrs 0.1C充电16小时 |
|
Standby Charge 后备充电 |
Boost charging at 80mA for 24 hours, then maintenance with 80mA intermittent charging for 3mins/30mins 以80mA充电24小时进行升压充电，然后每间隔30分钟以80mA 电流充电3分钟进行补充电维护 |
|
Standard Discharge 标准放电 |
0.2C to 1.0V 0.2C 放电到1.0V |
|
Fast Discharge 快速放电 |
0.5C to 1.0V 0.5C 放电到1.0V |
|
Maximum Continuous Discharge Rate 最大连续放电倍率 |
2C |
|
Operating Temperature 操作温度 |
Standard charge 0℃ to 50℃ Standby charge 0℃ to 55℃ Discharge放电 -15℃ to 70℃ |
|
Storage Temperature 储存温度 |
< 1 year -20℃ to 30℃ < 3 months -20℃ to 40℃ |
|
Typical Weight 典型重量 |
24g |
| Permanent Charge Endurance 持久充电耐受力 | ||
| Test Ambient Temperature | Cycle | Requirements |
|
Initial charge efficiency test Test ambient temperature: 40℃±2℃. |
Cycle No.1 第一次循环 |
No minimum duration required. 最短放电时间无要求。 |
|
Cycle No.2 第二次循环 |
3.75 hours minimum duration required. 最短放电时间3.75小时。 |
|
|
Cycle No.3 第三次循环 |
3.75 hours minimum duration required. 最短放电时间3.75小时。 |
|
|
Ageing period Test ambient temperature: 70℃±2℃. Note: The temperature of 70℃ has been selected to simulate the ageing of cells during 4 years. 备注：70℃的温度用以模拟电芯在4年时间内的老化过程。 |
Cycle No.4 第四次循环 |
No minimum duration required. 最短放电时间无要求。 |
|
Cycle No.5 第五次循环 |
No minimum duration required. 最短放电时间无要求。 |
|
|
Cycle No.6 第六次循环 |
No minimum duration required. 最短放电时间无要求。 |
|
|
Final charge efficiency test Test ambient temperature: 40℃±2℃. |
Cycle No.7 第七次循环 |
No minimum duration required. 最短放电时间无要求。 |
|
Cycle No.8 第八次循环 |
2.5 hours minimum duration required. 最短放电时间2.5小时。 |
|
|
Cycle No.9 第九次循环 |
2.5 hours minimum duration required. 最短放电时间2.5小时。 |
|
LSD Ni-MH
KRLT
